EZFluor^™ UV 1-step Fluorescent Protein Gel Stain is a ready-to-use luminescent protein gel stain designed for imaging using a UV transilluminator. The EZFluor UV protein stain requires only a single 5-30 minute staining step without fixation. Destaining is optional. Moreover, the EZFluor UV protein stain offers safer handling ａnd ease of disposal, because it is an aqueous-based solution that does not contain hazardous methanol or acetic acid. The EZFluor UV protein stain (after pH neutralization) passed environmental toxicity testing ａnd is classified as non-hazardous to the environment under CCR Title 22 regulations.

EZFluor UV 1-step Fluorescent Protein Gel Stain can detect as little as 1-10 ng of protein per band depending on the staining method used. The results obtained with EZFluor UV protein stain are comparable to those with Oriole Fluorescent Gel Stain; however, the EZFluor UV protein stain has a more convenient protocol, does not contain hazardous solvents, ａnd does not cause gel shrinkage. Staining is fully compatible with mass spectrometry ａnd Edman-based sequencing.

Spectral Properties
Absorbance: 288 nm
Emission: 603 nm

Fluorescent protein gel stain that requires only a single 5-30 minute staining step without fixation.

Protein gel stain

Research Category
Cell Culture

Research Sub Category
Live Cell Dye

Spectral Properties
Absorbance: 288 nm
Emission: 603 nm

Liquid

Store EZFluor^™ UV 1-step Fluorescent Protein Gel Stain at 2-8ºC. Protect From Light.

EZFluor is a trademark of Sigma-Aldrich Co. LLC

Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only ａnd are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.